How do I participate in SimVenture 2025 using my Redbird?

These directions apply to Redbird devices using Redbird Navigator. For Redbird Jay and Jay Velocity users, we recommend using the C172 aircraft when launching a flight to improve compatibility and the setup process.

Setting up my Redbird with PilotEdge for SimVenture 2025

Installation and Setup Instructions

  • You will need a Trial or Active PilotEdge account to participate in SimVenture with your Redbird. For more information on how to create a Trial PilotEdge account, you can go to https://www.pilotedge.net/join.

  • Once you have set up your PilotEdge account, you will next need to download the Scenery and NOTAM packages from the Prepar3D & FSX SimVenture Downloads page and follow the installation instructions from https://pilotedge.net/pages/fsxp3d-simventure2025 on the PilotEdge website.

  • Once PilotEdge is installed, log in using the PilotEdge account credentials you used when creating your PilotEdge account to finish configuring PilotEdge.

  • First, you will need to configure your PTT. Your Redbird's PTT is mapped by firmware, but you will still need to assign a key to this function. We recommend using the "~" key since it is generally unused on a Redbird device.

  • Next, make sure your communications device is properly assigned and configured. PilotEdge recommends "A headset to use with your computer flight simulator (USB headset, 3.5mm headset, or real-world aviation headset adapter". If you want to use your aviation headset with your Redbird device, we recommend checking out the Redbird Aviation Headset Connect (https://retail.redbirdflight.com/products/redbird-aviation-headset-connect).

  • You should not have to edit the Model Matching or Performance from the PilotEdge Pilot Client - Settings window. Just hit Apply and OK.
  • You should now see the PilotEdge icon in your Taskbar/System Tray.

If you do not see the PilotEdge icon in your System tray, you may need to edit the Taskbar settings to enable this icon.
  • Right-click on the Taskbar and select Taskbar settings

  • Next, scroll to the Navigation area and click Select which icons appear on the taskbar

  • Then, locate PilotEdge Pilot Client and make sure it is turned On to appear in the taskbar and verify again that the PilotEdge icon is in the Taskbar/System Tray.

  • Next, we recommend creating a scenario for Redbird Navigator to start you on the ramp at KMSN in Madison, WI. We've made this easier for you by making a downloadable file with this already done.
    • Download - KMSN Ramp.zip (Click to download)
    • Extract the folder KMSN SimVenture 2025 from the download into the C:\Redbird\Missions\Saved Flights folder
    • You should now see the mission KMSN SimVenture 2025 Ramp on the Dispatch screen in Navigator

Connecting my Redbird to PilotEdge for SimVenture 2025

Pre-connect Check List

  • Make sure your Redbird is up and running with the flight launched. We recommend using the KMSN SimVenture 2025 Ramp saved mission as a starting point.
  • Make sure the PilotEdge Pilot Client is running.
    • Look for the PilotEdge Pilot Client in the System Tray
  • PilotEdge Pilot Client will open a browser window, and it should look something like:

  • Enter your unique Callsign, we recommend using C172 or C182 for Type Code
  • You're all done. Just click Connect and you're on your way to KOSH for SimVenture 2025!