Skip to content
  • There are no suggestions because the search field is empty.

Redbird NXi Changelog

Bug fixes, updates, and enhancements to Redbird NXi

 

NXi: 2026-11-05

New Aircraft Released:

  • C206H G1000 NXi v1.0.0
  • T182T G1000 NXi v1.0.0
  • T206T G1000 NXi v1.0.0

NXi: v1.2.0 - 2026-11-05

Added

  • Angle of Attack backup gauge

  • Populate the procedure page with a Direct-To destination airport

  • Populate the HSI bearing pointer data when set to GPS

  • Preserve the selected altitude bug when the flight director is disabled

  • Resize holds and procedure turns based on the plane's ground speed

  • Show turn advisories ("Turn left to ___", "Next DTK ___")

  • Persist speed bug settings across flights

  • Reset PFD softkeys to the default layout after inactivity

  • Prefill search fields in MFD pages and PFD popups based on the flight plan

  • Update the airspeed tape markings and EIS gauge ranges for Cessna airframes

  • Improve autopilot following of GPS guidance during climbs

  • Improve the shading on the topography map and rendering on the charts

  • Update list of supported Redbird Peripherals

Fixed

  • Display the correct deviation on the CDI when overflying a VOR

  • Draw and fly Direct-To, heading, intercept, arc, and procedure turn legs correctly

  • Draw fly-over turns and procedure turns as dotted lines

  • Calculate VNAV correctly during procedure turns

  • Reduce overshoot when capturing a GPS track in autopilot

  • Pressing SUSP in a missed approach no longer freezes the application

  • Allow GPS mode autopilot for a Direct-To without a flight plan

  • Fix EGT Assist behavior

  • Preserve zoom level on the flight plan page when auto zoom is disabled

  • Handle duplicate waypoints in the flight plan correctly

  • Deactivate the cursor in a PFD popup when pressing the FMS knob

  • Prevent MFD freezing when manually activating a leg

  • General stability improvements

NXi: v1.1.1 - 2026-09-10

Fixed

  • [TD] Exclude Generic ASEL G1000 NXi, Complex aircraft (unsupported) from selection list 

NXi: v1.1.0 - 2026-09-03

Added

  • Support the Cessna 206H and T206H airframes

  • BATD support failures triggered via keyboard

  • AATD/BATD Aircraft compatability checks for required avionics databases

  • Add legacy Throttle IDS to list of Supported Redbird Peripherals

Fixed

  • Fix "Peak" behavior in EIS Lean page

  • Fix LOC autoswitching in approaches

  • Fix some approach transitions that weren't showing up

  • Prefill airport when pressing "Direct To" in the PFD

  • Improve map performance

NXi: v1.0.0 - 2026-08-19

  • Initial Release of Redbird G1000 NXi